EPL-300BTM-12V
B-TEC 300AMP / 12V LIFEPO4 BT SLIM METAL CASE BATTERY
$5,104.00
Short and Sweet Headlines are Best!
The Slimline incorporates a “Built-In Reset Button” making re-starting a flat battery a breeze. No longer do you need to apply a voltage to the battery terminals to wake up the battery. Press the button and within seconds, the battery will come back to life ready to accept a charge source to rejuvenate the battery.
The Enerdrive B-TEC battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;
- Battery Capacity
- Battery Voltage
- Battery Current (Amps)
- Battery State of Charge (SOC)
- Battery State of Health (SOH)
- Battery Status
- Individual Cell Voltage
- Battery Temperature
- Battery Cycles
- Battery Alarms
- Battery Event Information
Battery Management System
The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.
This product is not suitable to mount anywhere with a possibility of being exposed to the elements. It is an electronic product designed for internal use ONLY
Specifications
| SKU | EPL-200BT-12V-SLIM | EPL-300BTM-12V | EPL-400BTM-12V |
|---|
| Nominal Voltage | 12.8V | 12.8V | 12.8V |
| Nominal Capacity | 200Ah | 300Ah | 400Ah |
| Charge Cycles (DOD – 80% under controlled conditions) | >2500 Cycles | >2500 Cycles | >2500 Cycles |
| Standard Charge Specification (Lithium profile charger required) | |||
| Battery Charge Temperature | 0 ̴ 45°C | 0 ̴ 45°C | 0 ̴ 45°C |
| Normal Charge Voltage CV/CC* | 14.20 ̴ 14.60V | 14.20 ̴ 14.60V | 14.20 ̴ 14.60V |
| Standby (Float) Voltage | 13.50 ̴ 13.80V | 13.50 ̴ 13.80V | 13.50 ̴ 13.80V |
| Maximum Charge Current | 150A @ 25°C for 30mins | 150A @ 25°C for 30mins | 150A @ 25°C for 30mins |
| Recommended Charge Current for Maximum Life | 60A-120A | 60A-120A | 60A-120A |
| Standard Discharge Specification | |||
| Battery Discharge Temperature | -20 ̴ 60°C | -20 ̴ 60°C | -20 ̴ 60°C |
| Battery Output Voltage Range | 11.00 ̴ 14.60V | 11.00 ̴ 14.60V | 11.00 ̴ 14.60V |
| Maximum Discharge Current | 250A@25°C ± 5°C for 30mins | 250A@25°C ± 5°C for 30mins | 250A@25°C ± 5°C for 30mins |
| Pulse Discharge Current | 450A for 1.0s | 450A for 1.0s | 450A for 1.0s |
| Discharge Cut-off Voltage | <11.20V | <11.20V | <11.20V |
| Circuit Protection | The battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimize each single prismatic cell during charge & discharge, to protect the battery pack from overcharge, over discharge & short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery. | The battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimize each single prismatic cell during charge & discharge, to protect the battery pack from overcharge, over discharge & short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery. | The battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimize each single prismatic cell during charge & discharge, to protect the battery pack from overcharge, over discharge & short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery. |
| Over-Charge Protection | |||
| Over-charge Protection Per Cell | 3.75V ± 0.03V | 3.75V ± 0.03V | 3.75V ± 0.03V |
| Over-charge Release Per Cell | 3.60V ± 0.05V | 3.60V ± 0.05V | 3.60V ± 0.05V |
| Over-charge Release Method | Discharge below release voltage | Discharge below release voltage | Discharge below release voltage |
| Over-Discharge Protection | |||
| Over-discharge Protection Per Cell | 2.80V ± 0.05V | 2.80V ± 0.05V | 2.80V ± 0.05V |
| Over-discharge Release Per Cell | 3.20V ± 0.05V | 3.20V ± 0.05V | 3.20V ± 0.05V |
| Over-discharge Release Method | Apply Charge/Voltage >12.8V | Apply Charge/Voltage >12.8V | Apply Charge/Voltage >12.8V |
| Over Current Protection | |||
| Discharge Over Current | 280A for 25s – 400A for 3.5s | 280A for 25s – 400A for 3.5s | 280A for 25s – 400A for 3.5s |
| Protection Reset Time | 5s Auto Release | 5s Auto Release | 5s Auto Release |
| Over Current Release Method | Disconnect Load | Disconnect Load | Disconnect Load |
| Over Temperature Protection | |||
| Battery Discharge Over Temperature | Protection to 65°C ± 5°C | Protection to 65°C ± 5°C | Protection to 65°C ± 5°C |
| Release at 50°C ± 5°C | Release at 50°C ± 5°C | Release at 50°C ± 5°C | |
| Battery Charge Over Temperature | Protection to 55°C ± 5°C | Protection to 55°C ± 5°C | Protection to 55°C ± 5°C |
| Release at 45°C ± 5°C | Release at 45°C ± 5°C | Release at 45°C ± 5°C | |
| Short Circuit Protection | Auto release after 5s | Auto release after 5s | Auto release after 5s |
| Mechanical Characteristics | |||
| Dimensions | Length 530mm | Length 630mm | Length 630mm |
| Depth 83mm | Depth 176.5mm | Depth 216.5mm | |
| Height 600mm | Height 498mm | Height 498mm | |
| Weight | Approx 30 Kg | Approx 48 Kg | Approx 60 Kg |
| Case Construction | Powder Coated Zinc Plate | Powder Coated Zinc Plate | Powder Coated Zinc Plate |
| Storage Information | |||
| Temperature & Humidity Range | <30 days -20°C ̴ 60°C, 5 ̴ 75% RH | <30 days -20°C ̴ 60°C, 5 ̴ 75% RH | <30 days -20°C ̴ 60°C, 5 ̴ 75% RH |
| >30 days -10°C ̴ 45°C, 5 ̴ 75% RH | >30 days -10°C ̴ 45°C, 5 ̴ 75% RH | >30 days -10°C ̴ 45°C, 5 ̴ 75% RH | |
| Warranty | 5 Years | 5 Years | 5 Years |