EN3DC30-24
DC2DC 30AMP / 24V CHARGER / MPPT REG
$648.00
Short and Sweet Headlines are Best!
Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output
- DC M6 screw terminals that will allow for large battery cable connection between all sources
- A dedicated Maximum Power Point (MPPT) solar regulator The same battery algorithms as included in our AC mains ePOWER battery charger including a specific lithium charging profile
- 30A output up to 40+°C with thermo controlled fan cooling
- Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage
- Temperature sensor included in charger for more accurate battery charging
https://enerdrive.com.au/product/24v-30a-dc2dc-battery-charger/
Specifications
| Enerdrive | Dometic 24V 30A DC2DC Battery Charger | |
|---|---|
| SKU | EN3DC30-24V |
| Output Rating | |
| Output Voltage | 24V Nominal (17.0V min) |
| Output Current (Maximum) | 30A |
| Output Power | 865W |
| Charger DC Output (CH1): | |
| Selectable Battery Type | Gel, AGM, Flooded, Lithium, Program |
| Charger Voltage Range | 27.6V – 31.0V |
| Float Voltage Range | 26.0V – 27.6V |
| Charger Current (User Selectable) | 5 / 10 / 20 / 30A (default 30A) |
| Equalize Voltage (Flooded Battery) | 31.0V |
| Equalize Charging Current | 10% of Bulk Current Setting |
| Charging Control | 2 stage / 3 stage selectable (Default 3 Stage) |
| DC Output Bank | Single |
| Current draw from CH1 when not operating | ≤50 mA |
| Battery Temperature Setting | Low/ Normal/ High (Battery Temperature Sensor Standard) |
| Efficiency | 95% |
| INPUT Rating (CH2 – MPPT Solar) | |
| Input Voltage | 14.5 – 45VOC |
| Maximum Solar Input | ≤23V input, 500W (600W allowable) ≥37.5V-45V input, 800W (1000W allowable) |
| INPUT Rating (CH3 – Start/Alternator) | |
| Input Voltage | 10.5 – 16VDC / 21 – 32VDC |
| Dimensions | |
| Height x Width x Depth | 242mm x 172mm x 74mm |
| Unit Weight | 1.85 Kg |
| Shipping Weight | 2.17 kg |